5PCI Industrial Mainboard GW-H110-ATX V1.1 Lga1151 DDR4 ATX Visual Use Motherboard
| Model Name | GW-H110-ATX V1.1 |
| processor | Intel Desktop 6th, 7th, 8th and 9th Generation Processors |
| CPU | Support Celeron, Pentium, I3, I5, I7 series CPU, below 65W. |
| internal storage | technology | Dual channel DDR4 2666MHz |
| maximum capacity | The maximum capacity is 64GB, and the maximum support for a single slot is 32GB. |
| Memory slot | 2 288Pin DDR4 DIMM(Non-ECC) slots |
| Post I/O | HDMI | Standard D socket, supporting HDMI1.4, maximum resolution: 4096x2304@24Hz. |
| VGA | Standard DB15 socket, the maximum supported resolution is 2560*1600@60Hz. |
| serial port | Two standard DB9 serial ports, supporting RS232/RS422/RS485 mode (6 strings /8 strings are optional). |
| PS/2 interface | 1 PS/2-to-2 KB&MS interface |
| Ethernet | 1 Intel I211 gigabit network card and 1 I219V gigabit network card. |
| Audio | 1 rear audio interface (Line-out, Mic-in, Line_in) |
| USB port | 4 USB 3.0 interfaces and 2 USB 2.0 interfaces. |
| Internal connector | USB port | 3 USB2.0 interfaces (one pin FUSB can switch out 2 USB 2.0 interfaces) |
| serial port | 6 COM ports, supporting RS232 mode. |
| Audio | 1 front main audio interface and 1 SPDIF interface |
| PCIE interface | 1 16X slot and 1 4X slot (MINIPCIE interface is available when 4X slot uses 2X signal). |
| PCI interface | 5 PCI slots |
| MINIPCIE | 1 MINIPCIE interface, supporting WIFI and 4G module communication (this interface is available when 4X slot uses 2X signal). |
| serial ata | 4 7Pin SATA interfaces, supporting SATA 3.0 speed. (SATA1 and M.2 interfaces can only be selected) |
| M.2 interface | 1 M.2 interface, supporting SATA protocol. (SATA1 and M.2 interfaces can only be selected) |
| TPM interface | 1 2*10Pin TPM interface, supporting extended TPM module. |
| FP1 interface | 1 switch control panel |
| LPT interface | 1 2*13Pin parallel port |
| GPIO interface | 16 channels (2 groups of 8 channels) bidirectional 3.3V |
| RECOVERY | 1 system with one-button reset pin |
| PWR interface | 1 standard 2*12Pin ATX power input interface and 1 2*4Pin DC12V CPU power supply interface. |
| power consumption | Maximum power | Standby power consumption: 18.1 W Full load power consumption: 172.6W. |
| environment | temperature range | working environment | Storage environment |
| Temperature:-40 ~ 70℃ Humidity: 5%~95% | Temperature: -40~85℃ Humidity: 5%~95% |
| Physical size | measure | 305 mm x 244 mm |
